Self-Adhesive HDP Waterproofing Membrane by BEHA, incl. Squeegee, 5 m x 600 mm

Description

• The intelligent way to waterproof wet rooms: prime, adhere, done.
• Fast, clean, and economical, with no drying times.
• BEHA's HDP waterproofing system seals bathrooms and showers in minutes.
• No waiting for subsequent drying; tiles and other wall and floor coverings can be installed immediately.
• No carrying buckets or bags, no long drying times, and no dust.
• Process: prime the walls, wait approximately 5 minutes, install sealing corners and collars, apply joint tape along the edges, and adhere the waterproofing membrane.
• Compared with conventional systems using tile adhesive: no liquid membrane, no dust, no heavy bags to transport, and no waiting times for subsequent work.

Application: This waterproofing membrane is suitable for walls and floors in water exposure classes W1-I and W2-I. Before each installation, we recommend performing an adhesion test on the wall and visually inspecting the adhesive strips. Processing instructions: - Room temperature of at least +10C. - Wall and floor surfaces must be free of dust. - Sealing tapes must be dry and free of dirt. - The substrate must be dry and load-bearing. - In accordance with DIN 18534, the surface must always be primed. - For plaster and aerated concrete blocks, always use our primer spray. - The waterproofing system can be attached to all standard building wall constructions. - Before installing the shower back panel, always apply cartridge adhesive to the non-adhesive membrane material. If all requirements are met, fast and efficient installation is possible. Installation: Measure the wall with a tape measure and cut the waterproofing membrane accordingly. First hold the centrally slit membrane against the top edge of the corner adhesive strip and align it flush. Peel off approximately 5 cm of the release film at the top, secure the membrane to the wall, press lightly, and align it. Then position the membrane along the top edge, overlapping the corner adhesive strip as required. Caution: The waterproofing membrane cannot be removed from the corner adhesive strip once applied. Continue peeling the release film downward in stages. Use the squeegee to press the membrane firmly onto the wall and corner adhesive strip, working from top to bottom. Then remove the remaining release film from the membrane and press it firmly onto the wall and corner adhesive strip using the squeegee. Apply tile adhesive and install the tiles as usual. Dimensions: Length: 5 m; width: 600 mm; thickness: 0.5 mm.

Shipping and Returns

• We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
• Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
• Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
• All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
• Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
• In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.