Alex Flittner Designs Wall Paint Trend Color RAL 4003 Erika Violet, 5 L

Description

• Solvent-free interior dispersion paint according to RAL; emission-free and plasticizer-free
• Excellent opacity; water-thinnable, low-odor, diffusion-open
• Wet-scrub resistance class 3; opacity class 2; coverage approximately 7 m/L
• sd value: class 1, based on DIN EN ISO 7783-2
• Good filling properties; suitable for woodchip wallpaper and rough plaster surfaces
• Matte finish
• Color and size: RAL 4003 Erika Violet, 5 L

Application: High-quality dispersion paint for demanding wall and ceiling coatings in living and working areas. Easy and quick to apply. Properties: solvent-free and therefore environmentally considerate, low-emission, plasticizer-free, with excellent opacity; water-thinnable, low-odor and diffusion-open; sd value class 1, based on DIN EN ISO 7783-2; good filling properties, making it suitable for coatings on woodchip wallpaper and rough plaster surfaces; free from fogging-active substances. Ingredients according to VdL Guideline 01: acrylate dispersion, titanium dioxide, calcium carbonate, talc, silicate fillers, water, additives and preservatives. Color stated in the source: white. VOC legislation: EU limit value for the product (Category A/a): 30 g/L. The source states a maximum of 0 g/L VOC in one section and 40 g/L VOC in another. Application conditions: Do not apply at substrate or ambient temperatures below +5C or above +35C, in direct sunlight or strong wind. Relative humidity: maximum 75%. Suitable substrates: old and new plaster (mortar groups P II, P III and P IVa, b, c), concrete, calcium silicate brick, woodchip wallpaper, gypsum board, glass fabric and firmly adhering old coatings. Substrate preparation: The substrate must be clean, dry, sound and free from dust, oil, grease, wax and corrosion products. Completely remove glue-paint coatings and damaged or non-load-bearing old coatings. Newly plastered areas must be sufficiently set and dry. Apply a priming coat of LF deep primer to chalking, sandy or coarsely porous surfaces. Observe VOB Part C and DIN 18363. Application: Stir thoroughly before use. Apply and distribute the paint evenly to prevent patchiness and glossy areas caused by differing coat thicknesses. Apply by brush or roller. On absorbent substrates and at higher temperatures, dilute with up to 10% water. Drying time: At 20C and 65% relative humidity, surface-dry and recoatable after approximately 8 hours. Drying through takes longer at lower temperatures. Coverage: Depends on the structure and absorbency of the substrate; an exact figure cannot be given. A test coat on the intended surface is recommended for precise calculation. Depending on the substrate and application method, approximately 710 m/L per coat. Two coats are recommended. Legal information: Ingredients according to VdL Guideline 01: acrylate dispersion, white pigment, titanium dioxide, calcium carbonate, silicates, water, inorganic and organic pigments, additives and preservatives. Contains 3:1 mixture of chlor-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one, as well as (ethylenedioxy)dimethanol. Do not allow the product to enter drains, waterways or soil. Do not allow water used to clean application equipment to enter the soil or surface water. Use the product safely. Always read the label and product information before use. The source also states a maximum VOC content of 40 g/L. GISBAU code: BSW 20. EUH211: Warning! Hazardous respirable droplets may form when sprayed. Do not inhale aerosol or mist.

Shipping and Returns

• We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
• Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
• Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
• All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
• Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
• In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.