20-Pack Interior Waterproofing Corner Seals for Tile

Description

• 90 interior corner; 3D-welded and coated with thermoplastic elastomer (TPE)
• 100% elastomer; tear-resistant, elastic across the width and stable along the length
• Excellent adhesion to all LEVEL+ liquid polymer and polymer-cement sealing compounds
• Resistant to common chemicals and cleaning agents
• UV-, aging-, fungus- and mold-resistant; permanently elastic and thermoplastic
• For interior and exterior use in areas exposed temporarily or permanently to water and moisture
• Suitable for bathrooms, toilets, showers, kitchens, laundry rooms, basements, pools, saunas, fountains, balconies and terraces
• For wall-to-floor interior corners and sealing systems at exterior corners under tile
• Suitable for heated or unheated cement substrates and other stable, load-bearing substrates
• Not intended for structural or building joints
• Total width: 120 mm; sealing zone: 70 mm; expansion-zone width: 20 mm
• Gray; polypropylene (PP) nonwoven carrier; total thickness: 0.50 mm 0.1 mm

LEVEL+ waterproofing corner G01 RM23 for 90 interior corners. The ready-to-use sealing corner is made with a 100% thermoplastic elastomer sealing core and is designed for uncomplicated installation, stress bridging, high elongation and use on heated floor constructions, balconies, terraces, bathrooms, showers, toilets, kitchens, laundry rooms and basements. The product is compatible with all LEVEL+ liquid polymer and polymer-cement sealing compounds. Use it indoors or outdoors in rooms and areas exposed to water or moisture. It is intended for wall-to-floor interior corners and for sealing systems at exterior corners under tile, but not for structural or building joints. Before installation, the substrate must be stable, level, clean, free of dust and grease, and free of old paint or fine particles that could impair adhesion. Remove contamination and non-load-bearing layers and repair with suitable material. If necessary, prime with the appropriate LEVEL+ primer. Suitable substrates include bonded or floating cement substrates, heated or unheated, as well as ceramic masonry units, cellular concrete, cement or gypsum plaster, reinforced concrete, gypsum board, fiber gypsum board, OSB board and gypsum blocks. Technical data: gray; polypropylene (PP) nonwoven carrier; thermoplastic elastomer (TPE) sealing core; total width 120 mm; sealing zone 70 mm; expansion-zone width 20 mm; installation air and substrate temperature from +5C to +25C; total thickness 0.50 mm 0.1 mm. Protect from direct sunlight, heat sources and open flames. Store protected from frost in the original sealed packaging, in dry conditions at room temperature above +5C. Perform work according to the technical safety data sheet, instructions for use, applicable standards and occupational safety regulations. Technical data and application information apply at 25C 2C and 5560% relative humidity; drying and setting times may vary under other weather conditions. Keep away from children. If the product gets into the eyes, rinse thoroughly with water immediately and consult a physician. The manufacturer is not liable for damage resulting from application errors, improper use or improper storage. Read the specific conditions of use before application. Only completely emptied and cleaned containers should be submitted for recycling. Packaging waste codes: 15 01 01 for paper and cardboard packaging; 15 01 02 for plastic packaging. Consult the manufacturer if you have questions. The warranty applies only to product quality, and the manufacturer does not verify proper or successful product use. This technical data sheet supersedes all previous editions.

Shipping and Returns

• We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
• Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
• Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
• All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
• Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
• In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.